The Do’s and Don’ts of Sink Repair and Maintenance

Due to clogs, leaks, loose parts, or just frequent use over time, you may need a sink repair service during your sink’s lifetime. For more complicated sink repair issues, your best bet is probably to call a plumber. But for any general sink maintenance and minor repairs, doing it yourself may be the way to go. To help save you some time and stress in the future, here are the do’s and don’ts of sink repair and maintenance.

The Do’s of Sink Repair and Maintenance

Do Keep a Diagram of Your Sewer System on Hand

To save yourself from a headache in the event of a plumbing emergency, it’s a good idea to make a diagram of your sewer system and keep it handy. Make note of where the shutoff valve the water heater, and the water source are located. Not only will this help you in the event of an emergency, but it will help your plumber out as well.

Do Run Cold Water with Your Garbage Disposal

To avoid a clog or a need for garbage disposal repair, be sure to run cold water at full pressure before, during, and after running the garbage disposal.

Do Clean Your Drains Regularly

To avoid buildup and frustrating drain clogs, be sure to clean your drains regularly—even if they appear to be working just fine. It’s best to stick to natural drain cleaning methods, as chemicals are bad for the environment, can be dangerous, and often don’t work as well as they claim.

Do Take On Minor Plumbing Projects By Yourself

When it comes to sink repair and plumbing projects, as long as you know what you’re doing, feel free to take on the repair. This guide can help you decide whether you should attempt a DIY plumbing project or to hire a plumber.

The Don’ts of Sink Repair and Maintenance

Don’t Do Anything Before Shutting Off the Water

The first rule of sink repair: turn off the water. Don’t start taking anything apart or attempting any repairs before you shut off the water. Depending on the project and your home’s plumbing, you may need to shut off the water at the source or the main line.

Don’t Mix Up Parts That You’ve Taken Apart

If you’re taking anything apart to complete a repair, be sure to organize all of the parts—even if you’re sure you know where they go—rather than putting them all together in a pile. This will make putting everything back together much faster and easier.

Don’t Keep Going if You Get Stuck

Hit a wall in your plumbing project? Is the problem much worse than you thought? Instead of making matters worse, stop where you are and call a plumber. Be sure to make note of any work you’ve done so your plumber knows what he’s working with.

Quality Sink Repair and Other Plumbing Services

A good rule of thumb: when in doubt, call a plumber. Our experts can quickly and accurately identify and repair any sink or plumbing problems you may face. Click below to learn more about our sink repair services.

[button src=”http://www.stephensplumbing.net/plumbing-services/sink-and-faucet-services/sink-repair/” size=”medium”]LEARN MORE[/button]